How to Flash Sprint HTC One To pageplus step by step guide

You will need your MSL Code to Continue (Call sprint or use sprint chat and tell them no matter what you do it asks for the MSL code and keep trying until you get it. Might be other ways to get it on this site

Collect needed files here: http://cdmaflashingguide.blogspot.com/2014/03/update-as-most-of-you-know-android-4.html


1. Call PagePlus and create a new account and have them add your phone. (Online chat works great)
2. On the HTC One Dial ##XXXXXX# (X= your 6 digit MSL Code)
3. Select Edit mode
4. Select Mobile Directory Number (MDN) and enter your phone number then hit OK
5. Select MSID and enter your MIN number (If you dont know call pageplus and ask they will give it to you)
6. (After all the drivers are installed) Connect Phone to your computer with your USB Chord.
7. On the HTC One Dial ##3424# press 1. ON it will Highlight in Gray, then press select and enter your 6 digit MSL.
8. On the HTC One Dial ##737425# press 1. ON it will Highlight in Gray, then press select and enter your 6 digit MSL.
9. Open DFS cdma tool, Click on ports on the top left, Double Click on HTC Diagnostic Interface 9K
10. Type your 6 digit MSL code and click SPC and you should see in the log say unlocked
11. Then click on the NAM tab, on over on the right you will see PRL, Click load and select your page plus PRL you downloaded and then click on write. (Write to UseNam1 and UseNam2) (Write them 2x to make sure they stick)
12. Click on the DATA Tab and under account settings put in:
(Without donor phone this will only get you 1x , If you need 3G keys visit http://goo.gl/Eq7Rfz)

PAP
UID: yourphonenumber@vzw3g.com
PWD: samsung

PPP
SIP NAI: yourphonenumber@dun.vzw3g.com
UID: yourphonenumber@vzw3g.com
PWD: vzw

HDR AN
NAI: yourphonenumber@vzw3g.com
PWD: vzw

HDR AN LONG
UID: yourphonenumber@vzw3g.com
PWD: vzw

HDR AN PPP
UID:
PWD:

On the right under mode change to:
HDR SCP force AT config: RevA_MFPA
HDR SCP force release 0 config : EVDO_RevA
Hybrid preferred mode: Enable
Data MDR (HSPD) mode: SO33_Pref
Data service option: IS707
CLICK WRITE (Do this 2 times to confirm it wrote)

13. Click on Mobile IP Tab and enter:

DS QcMIP: PrefMobileIP

Profile Settings:
Active profile: 0
Number of Profiles: 1

Registration settings:
Retries count: 2
Pre-Reg timeout: 30
Retries interval: ms1750

settings:
2002 BIS MN HA AUTH: Put a check mark
Domant handoff: Put a check mark
PRQ IF Traffic:

Under profile column:
Select the first bubble and make active (Right click, enable profile)
Make sure all other profiles are Disabled (Righ click, Disable profile)

Selected profile settings:
*** Make sure profile 1 bubble is BLUE****

Current User Profile
NAI: yourphonenumber@vzw3g.com
Home address: 0.0.0.0 MN HA SPI set: Check box 300
Prim HA address 255.255.255.255 MN AAA SPI set: Check box 2
Sec HA address 255.255.255.255 Reverse Tunneling pref: Check box

Share Secret User Profile
AAA Shared Secret
Enter value in HEX: Check Box
(In white box enter: vzw)

HA Shared Secret
Enter value in HEX: Check box
(In white box enter: vzw)

Detail
RM NAI : yourphonenumber@dun.vzw3g.com
DMU PKOID: 10 DMU MN Auteth: 1.178.7

CLICK ON " Write current profile settings" do this 2x to make sure everything stuck

P.S - If you need 3G keys PM and i can pull them for you, Remember after you put in the 3g keys and write them, DO NOT READ THEM AGAIN OR IT WILL CLEAR THEM OUT AND SHOW AS NOTHING WAS PUT IN, So enter the password and click write 2 x each and then do not read after that.


14. Click Reset in the top right, and restart phone!
15. Once phone is restarted:
Dial ##3282# click Edit Mode
Enter your MSL code (6 digit code)
Click on EVDO then Click on DDTM and make sure it is Enabled. Then hit okay and then hit the back key (<)
Click on Advanced, Scroll to the the very bottom, Click on eHRPD and set to Disable then hit ok.
Click on LTE and Disable that also, and click ok.
Now in the top right of the phone click menu, and click on commit modifications and your phone should restart with 3G providing keys were pulled for you, If you need keys visit http://goo.gl/Eq7Rfz

Youtube streaming and MMS:
Dial ##3282#, tap edit and enter your MSL (6 digit code) click Advanced then click on RTSP/HTTP Setting change it to:
RTSP proxy ip: 0.0.0.0
RTSP proxy port: 0
HTTP proxy ip: 0.0.0.0
HTTP proxy port: 0
Then Click back (<)

Then click on MMSC
Name: PP (whatever you want)
MMSC: HTTP://MMS.VTEXT.COM/SERVLETS/MMS or http://mms.vtext.com/servlets/mms?X-VZW-MDN=PHONENUMBER
MMS Proxy: Leave Blank
MMS Port: 80 or 8080
MMS Protocol: WAP 2.0
Click top right 3 dots.
Click Save.
Should Say APN Saved.

Clean up! (If your flashing the 10.key follow the process below before doing step A and B)
A. On the HTC One Dial ##3424# press 2. OFF it will Highlight in Gray, then press select.
B. On the HTC One Dial ##737425# press 2. OFF it will Highlight in Gray, then press select.

PM me if you need any help!
If this guide helps you please say thanks!